The OEM replacement springs that I used are Federal Mogul Sealed Power VS721. There is wide variation from spring to spring. So I tested each one and sorted the springs by tension. I also checked them for bind height. Since I am using rotators I need to be sure I have plenty of clearance when the valves are open. All exceeded the OEM spec range by anywhere from 1 to 20lbs. The bind height varied quite a bit too. 1.000" on the low end and 1.087 on the high end. So much for quality.
No portion of this page, text, images or code, may be copied, reproduced,
published or distributed in any medium without the expressed written permission
of the copyright holder.