This photos shows the first board in place and the 2nd one getting ready to snap in. The red arrows show where the machine screws were used to attach the "start" side.
The yellow circles show where the rivets were placed. I used 1/8" aluminum rivets. All subsequent boards were riveted in the same manner.
I could have used machine screws throughout but I was working mostly by myself and the rivets allowed me to do that. Machine screws would have required a helper to hold the screws inside while I tightened the nuts underneath the coach.
No portion of this page, text, images or code, may be copied, reproduced,
published or distributed in any medium without the expressed written permission
of the copyright holder.