Here are the Rear Tail Light Fixture or Housings that I used to create LED updated rear motorhome tail lights. I purchased them at our local “Pick and Pull” Car wrecker yard from 85 to 95 Chevy and GMC Full size vans. (G20) I\'ve purchase a few sets over the years and these are usually commercial vehicles that have had a pretty rough life. Left and Right housings are different and should be purchased in pairs if possible. I also make sure I take the pigtails and mounting screws at the same time. Simply cut the pigtails off with 6 to 8 inches of wire, and the screws are beautiful stainless steel. You need a Torx T15 screwdriver for the fixture. As you can see, the weathering, and scratching, can be somewhat extensive, but if its not broken and scratches are not deep, you will be able to significantly restore the lenses. There were tons of these vans have been made over the year so your local Wrecker likely has a set for you. All that being said, brand new ones are are available at your local GMC Supplier, LMC Truck, Local “Crash Parts” suppliers, eBay, Amazon, or on line. Most of these are not OEM Parts, and pigtails need to be purchased in addition.
No portion of this page, text, images or code, may be copied, reproduced,
published or distributed in any medium without the expressed written permission
of the copyright holder.