Using 2 sets of 4 terminal flat trailer connectors create a wiring strategy that makes connection and disconnection easy. Trailer connectors are inexpensive and easy to acquire in almost all auto parts outlets. And 18ga wires are plenty large enough for the LED fixture. The LED fixture uses very little current. I wire the colors to emulate trailering standards. The Female side of the connector should always be on the Power supply side. White = Ground : Brown = Clearance (Park) : Yellow = Left Signal (stop): Green = Right Signal (stop). That means that one of the other “Side colors need to be used for the Reverse Light. ( Make sure you confirm the correct light functions on the coach side of the connectors. I also use a few wraps of tape to identify the sides.
No portion of this page, text, images or code, may be copied, reproduced,
published or distributed in any medium without the expressed written permission
of the copyright holder.