EAC02

The PVC Fitting is in the wrong place and pointed in the wrong direction, Plus the Lip is not hgh enough to clear the Accelerator Pump and Choke linkages and the throttle lever.  The Cruise Control Linkages and servo forced me to move the fresh air intake of the PVC to the Passenger side from the drivers side.  I also did not want the steel tube.

When I changed the Intake Manifold to an Edelbrock aluminum performer, I also purchased a used Edelbrock finned air cleaner that I thought was kind of sexy!! The original air cleaner would not fit because the carburetor was now higher. I had to ensure the new air cleaner fit and found I needed to raise it to clear the accelerator pump and linkages. I also had to move the PVC Tube fitting to a better spot and improve the angle. While the air cleaner was in fact sexy, I did not like the intake noise that it transmitted. I later adapted the original air cleaner..