20130705_181725

The rear fuel tank has the fuel pickup for the generator. When I installed the Howell TBI system I used the generator fuel pickup as the return port for the pressure regulator on the throttle body. I use a 3/8" flair right angle fitting on top of the tank. I will route this to the side of the tank and install a 3/8" flair 'T'. One side of the 'T' will go to the generator fuel pump and the other side of the 'T' will go to the return line from the throttle body. By placing the 'T' on the side of the fuel tank I will be able to access it in order to disconnect the fittings if/when I want to drop the tanks again.