20130722_190929

This shows the filler line of the rear tank. The hose used to connect the filler tubes is from fillernecksupply.com who sells gas filler hose by the inch. The filler hose shown here is 1 1/8". I use Teflon tape under the clamps to keep the pressure on the hose the same around the diameter of the hose as the clamp tightens. This is a very difficult connection to make. The location is awkward and it is hard to get enough pressure on the copper elbow to get it to slide into the hose. The 'T' in the background is the drain from the fuel/vapour separator overflow where it is connected to the gas tank fuel filler vent line.